mirror of
https://github.com/torvalds/linux
synced 2026-07-22 10:10:47 +09:00
master
2191 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
26ae421f7f |
Merge tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
|
||
Krzysztof Wilczyński
|
4e14b965a6 |
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
Currently, legacy_io and legacy_mem are dynamically allocated and created by pci_create_legacy_files(), with pci_adjust_legacy_attr() updating the attributes at runtime on Alpha to rename them and shift the size for sparse addressing. Convert to four static const attributes (legacy_io, legacy_io_sparse, legacy_mem, legacy_mem_sparse) with .is_bin_visible() callbacks that use pci_legacy_has_sparse() to select the appropriate variant per bus. The sizes are compile-time constants and .size is set directly on each attribute. Register the groups in pcibus_groups[] under a HAVE_PCI_LEGACY guard so the driver model handles creation and removal automatically. Stub out pci_create_legacy_files() and pci_remove_legacy_files() as the dynamic creation is no longer needed. Remove the __weak pci_adjust_legacy_attr(), Alpha's override, and its declaration from both Alpha and PowerPC asm/pci.h headers. Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Link: https://patch.msgid.link/20260508043543.217179-23-kwilczynski@kernel.org |
||
|
Krzysztof Wilczyński
|
574b5470f8 |
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
Currently, Alpha's sparse/dense legacy attribute handling is done via pci_adjust_legacy_attr(), which updates dynamically allocated attributes at runtime. The upcoming conversion to static attributes needs a way to determine sparse support at visibility check time. Add a __weak pci_legacy_has_sparse() that returns false by default. Alpha overrides it to check has_sparse() on the bus host controller. Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Link: https://patch.msgid.link/20260508043543.217179-22-kwilczynski@kernel.org |
||
|
Krzysztof Wilczyński
|
385ec1d407 |
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
Currently, pci_mmap_legacy_page_range() reads the legacy resource size from bus->legacy_mem->size or bus->legacy_io->size. This couples the mmap bounds check to the struct pci_bus fields that will be removed when legacy attributes are converted to static definitions. Compute the size directly using PCI_LEGACY_MEM_SIZE (0x100000) and PCI_LEGACY_IO_SIZE (0xffff) macros, and shift by 5 bits for sparse systems. Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Magnus Lindholm <linmag7@gmail.com> Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Acked-by: Magnus Lindholm <linmag7@gmail.com> Link: https://patch.msgid.link/20260508043543.217179-21-kwilczynski@kernel.org |
||
|
Krzysztof Wilczyński
|
b7a57ffd4d |
alpha/PCI: Convert resource files to static attributes
Previously, Alpha's PCI resource files (resourceN, resourceN_sparse, resourceN_dense) were dynamically created by pci_create_resource_files(), which overrides the generic __weak implementation. The previous code allocated bin_attributes at runtime and managed them via the res_attr[] and res_attr_wc[] fields in struct pci_dev. Convert to static const attributes with three attribute groups (plain, sparse, dense), each with an .is_bin_visible() callback that checks resource length, has_sparse(), and sparse_mem_mmap_fits(). A .bin_size() callback provides the resource size to the kernfs node, with the sparse variant shifting by 5 bits for byte-level addressing. Register the groups via ARCH_PCI_DEV_GROUPS so the driver model handles creation and removal automatically. Use the new pci_resource_is_mem() helper for the type check, replacing the open-coded bitwise flag test. Finally, remove pci_create_resource_files(), pci_remove_resource_files(), pci_create_attr(), and pci_create_one_attr() which are no longer needed. Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Magnus Lindholm <linmag7@gmail.com> Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Acked-by: Magnus Lindholm <linmag7@gmail.com> Link: https://patch.msgid.link/20260508043543.217179-18-kwilczynski@kernel.org |
||
|
Krzysztof Wilczyński
|
5980dcbc4b |
alpha/PCI: Add static PCI resource attribute macros
Add macros for declaring static binary attributes for Alpha's PCI resource files: - pci_dev_resource_attr(), for dense/BWX systems (mmap dense) - pci_dev_resource_sparse_attr(), for sparse systems (mmap sparse) - pci_dev_resource_dense_attr(), for dense companion files (mmap dense) Each macro creates a const bin_attribute with the BAR index stored in the .private property and the appropriate .mmap() callback. Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Magnus Lindholm <linmag7@gmail.com> Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Acked-by: Magnus Lindholm <linmag7@gmail.com> Link: https://patch.msgid.link/20260508043543.217179-17-kwilczynski@kernel.org |
||
|
Krzysztof Wilczyński
|
29840080f5 |
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
Remove the WARN() that fires when userspace attempts to mmap beyond the BAR
bounds. The check still returns 0 to reject the mapping, but the warning
is excessive for normal operation.
A similar warning was removed from the PCI core in the commit
|
||
|
Krzysztof Wilczyński
|
802a3b3f47 |
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
Currently, __pci_mmap_fits() computes the BAR size using
"pci_resource_len() - 1", which wraps to a large value when the BAR length
is zero, causing the bounds check to incorrectly succeed.
Add an early return for empty resources.
Fixes:
|
||
|
Krzysztof Wilczyński
|
30d01a8c3a |
alpha/PCI: Use PCI resource accessor macros
Replace direct pdev->resource[] accesses with pci_resource_n(), and open-coded res->flags type checks with pci_resource_is_mem() and pci_resource_start() helpers. While at it, move the pci_resource_n() call directly into pcibios_resource_to_bus() and drop the local struct resource pointer. No functional changes intended. Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Magnus Lindholm <linmag7@gmail.com> Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Magnus Lindholm <linmag7@gmail.com> Link: https://patch.msgid.link/20260508043543.217179-14-kwilczynski@kernel.org |
||
|
Krzysztof Wilczyński
|
7d9779cb10 |
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
Currently, Alpha's pci_create_one_attr() stores a resource pointer in
attr->private, and pci_mmap_resource() loops through all BARs to find
the matching index.
Store the BAR index directly in attr->private and retrieve the resource via
pci_resource_n(). This eliminates the loop and aligns with the convention
used by the generic PCI sysfs code.
The PCI core change was first added in the commit
|
||
|
Krzysztof Wilczyński
|
78a228f0aa |
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
Currently, Alpha's pci_mmap_resource() does not check security_locked_down(LOCKDOWN_PCI_ACCESS) before allowing userspace to mmap PCI BARs. The generic version has had this check since commit |
||
Kees Cook
|
4cb5e246e6 |
alpha: Remove arch-specific strncpy() implementation
strncpy() has no remaining callers in the kernel[1]. Remove the alpha-specific assembly implementation and __HAVE_ARCH_STRNCPY define, falling back to the generic version in lib/string.c. The __stxncpy helper (stxncpy.S/ev6-stxncpy.S) is retained as it is still used by strncat. Link: https://github.com/KSPP/linux/issues/90 [1] Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Linus Torvalds
|
bd77e50c9a |
Merge tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the removal of the Hercules monochrome ISA graphics driver and
the corresponding text console driver, there is just the typical
maintanance with smaller driver fixes and cleanups:
Removal of drivers:
- Hercules monochrome ISA graphics adapter driver (Ethan Nelson-Moore)
- Hercules mdacon console driver (Ethan Nelson-Moore)
Changes affecting many drivers at once:
- possible memory leak fixes in various drivers (Abdun Nihaal)
- many conversions to use strscpy() (David Laight)
- Use named initializers in drivers (Uwe Kleine-König)
Code fixes:
- fbcon: don't suspend/resume when vc is graphics mode (Lu Yao)
- modedb: fix a possible UAF in fb_find_mode() (Tuo Li)
- modedb: Fix entry for 1920x1080-60 mode (Steffen Persvold)
- arm: Export acorndata_8x8 font symbol for bootloader (Helge Deller)
- omap2: fix use-after-free in omapfb_mmap (Hongling Zeng)
Cleanups:
- pxa168fb: use devm_ioremap_resource() (Alberto Arostegui)
- provice helpers for fb_set_var() and fb_blank() and fbcon updates
(Thomas Zimmermann)
- fbcon: Use correct type for vc_resize() return value (Jiacheng Yu)
- chipsfb: add missing MODULE_DESCRIPTION() macro (Rahman Mahmutović)
- sunxvr2500: replace printk with device-aware logging functions
(Rahman Mahmutović)
- sm712: Fix operator precedence in big_swap macro (Li RongQing)
- imxfb: Use of_device_get_match_data() (Rosen Penev)
- atmel_lcdfb: Use of_device_get_match_data() (Rosen Penev)
Documentation fixes:
- grvga: Fix CLUT register address offset in comment (Eduardo Silva)
- omap/dss: Fix stale modedb.c path (Costa Shulyupin)
- correct CONFIG_FB_TILEBLITTING macro name in #endif comment (Ethan
Nelson-Moore)"
* tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (43 commits)
fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode
fbdev: modedb: fix a possible UAF in fb_find_mode()
fbdev: s3fb: Use strscpy() to copy strings into arrays
fbdev: sm501fb: Fix buffer errors in OF binding code
fbcon: correct CONFIG_FB_TILEBLITTING macro name in #endif comment
fbdev/arm: Export acorndata_8x8 font symbol for bootloader
fbdev: mmpfb: Use strscpy() to copy device name
fbdev: sisfb: Replace strlen() strcpy() pair with strscpy()
fbdev: rivafb: Use strscpy() to copy device name
fbdev: cyber2000fb: Use strscpy() to copy device name
fbdev: atmel_lcdfb: Use strscpy() to copy device name
fbdev: Do not export fbcon from fbdev
fbdev: Wrap fbcon updates from vga-switcheroo in helper
fbdev: Wrap user-invoked calls to fb_blank() in helper
fbdev: Wrap user-invoked calls to fb_set_var() in helper
fbdev: omap2: fix use-after-free in omapfb_mmap
docs: omap/dss: Fix stale modedb.c path
fbdev: pxa168fb: use devm_ioremap_resource() for MMIO
fbdev: grvga: Fix CLUT register address offset in comment
fbdev: sunxvr2500: replace printk with device-aware logging functions
...
|
||
|
Linus Torvalds
|
13e1a6d6a1 |
Merge tag 'irq-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull interrupt core updates from Thomas Gleixner:
- Rework of /proc/interrupt handling:
/proc/interrupts was subject to micro optimizations for a long time,
but most of the low hanging fruit was left on the table. This rework
addresses the major time consuming issues:
- Printing a long series of zeros one by one via a format string
instead of counting subsequent zeros and emitting a string
constant.
- Simplify and cache the conditions whether interrupts should be
printed
- Use a proper iteration over the interrupt descriptor xarray
instead of walking and testing one by one.
- Provide helper functions for the architecture code to emit the
architecture specific counters
- Convert the counter structure in x86 to an array, which
simplifies the output and add mechanisms to suppress unused
architecture interrupts, which just occupy space for nothing.
Adopt the new core mechanisms.
This adjusts the gdb scripts related to interrupt counter statistics
to work with the new mechanisms.
- Prevent a string overflow in the /proc/irq/$N/ directory name
creation code.
* tag 'irq-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/irq: Add missing 's' back to thermal event printout
genirq/proc: Speed up /proc/interrupts iteration
genirq/proc: Runtime size the chip name
genirq: Expose irq_find_desc_at_or_after() in core code
genirq: Add rcuref count to struct irq_desc
genirq/proc: Increase default interrupt number precision to four
genirq: Calculate precision only when required
genirq: Cache the condition for /proc/interrupts exposure
genirq/manage: Make NMI cleanup RT safe
genirq: Expose nr_irqs in core code
scripts/gdb: Update x86 interrupts to the array based storage
x86/irq: Move IOAPIC misrouted and PIC/APIC error counts into irq_stats
x86/irq: Suppress unlikely interrupt stats by default
x86/irq: Make irqstats array based
genirq/proc: Utilize irq_desc::tot_count to avoid evaluation
genirq/proc: Avoid formatting zero counts in /proc/interrupts
x86/irq: Optimize interrupts decimals printing
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
|
||
|
Linus Torvalds
|
7e0e7bd60d |
Merge tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Reduce pipe->mutex contention by pre-allocating pages outside the
lock in anon_pipe_write().
anon_pipe_write() called alloc_page() once per page while holding
pipe->mutex. The allocation can sleep doing direct reclaim and runs
memcg charging, which extends the critical section and stalls any
concurrent reader on the same mutex. Now up to 8 pages are
pre-allocated before the mutex is taken, leftovers are recycled
into the per-pipe tmp_page[] cache before unlock, and any remainder
is released after unlock, keeping the allocator out of the critical
section on both sides. On a writers x readers sweep with 64KB
writes against a 1 MB pipe throughput improves 6-28% and average
write latency drops 5-22%; under memory pressure - when the cost of
holding the mutex across reclaim is highest - throughput improves
21-48% and latency drops 17-33%. The microbenchmark is added to
selftests.
- uaccess/sockptr: fix the ignored_trailing logic in
copy_struct_to_user() to behave as documented and the usize check
in copy_struct_from_sockptr() for user pointers, and add
copy_struct_{from,to}_bounce_buffer() and copy_struct_to_sockptr()
helpers for upcoming users (IPPROTO_SMBDIRECT, IPPROTO_QUIC).
- bpf: add a sleepable bpf_real_inode() kfunc that resolves the real
inode backing a dentry via d_real_inode(). On overlayfs the inode
attached to the dentry doesn't carry the underlying device
information; this is used by the filesystem restriction BPF program
that was merged into systemd.
- docs: add guidelines for submitting new filesystems, motivated by
the maintenance burden abandoned and untestable filesystems impose
on VFS developers, blocking infrastructure work like folio
conversions and iomap migration.
Fixes:
- libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
and drop the now-redundant assignments in callers. This began as a
one-line dma-buf fix for a path_noexec() warning; a pseudo
filesystem has no reason not to set SB_I_NOEXEC. All init_pseudo()
callers were audited: the only visible effect is on dma-buf where
SB_I_NOEXEC silences the warning.
- Handle set_blocksize() failures in legacy filesystems (bfs, hpfs,
qnx4, jfs, befs, affs, isofs, minix, ntfs3, omfs). Mounting a
device with a sector size > PAGE_SIZE crashed roughly half of them;
the rest had the same missing error handling pattern. Plus a
follow-up releasing the superblock buffer_head when setting the
minix v3 block size fails.
- mount: honour SB_NOUSER in the new mount API.
- fs/fcntl: fix a SOFTIRQ-unsafe lock order in fasync signaling by
switching the process-group paths of send_sigio() and send_sigurg()
from read_lock(&tasklist_lock) to RCU, matching the single-PID
path.
- vfs: add an FS_USERNS_DELEGATABLE flag and set it for NFS, fixing
delegated NFS mounts (fsopen() in a container with the mount
performed by a privileged daemon) that broke when non-init
s_user_ns was tied to FS_USERNS_MOUNT.
- selftests/namespaces: fix a hang in nsid_test where an unreaped
grandchild kept the TAP pipe write-end open, a waitpid(-1) race in
listns_efault_test, and a false FAIL on kernels without listns()
where the tests should SKIP.
- filelock: fix the break_lease() stub signature for
CONFIG_FILE_LOCKING=n.
- init/initramfs_test: wait for the async initramfs unpacking before
running; the test and do_populate_rootfs() share the parser state.
- fs/coredump: reduce redundant log noise in
validate_coredump_safety().
- iomap: pass the correct length to fserror_report_io() in
__iomap_write_begin().
- backing-file: fix the backing_file_open() kerneldoc.
Cleanups:
- initramfs: refactor the cpio hex header parsing to use hex2bin()
instead of the hand-rolled simple_strntoul() which is reverted, and
extend the initramfs KUnit tests to cover header fields with 0x
prefixes.
- Replace __get_free_pages() and friends with kmalloc()/kzalloc()
across quota, proc, ocfs2/dlm, nilfs2, nfs, nfsd, libfs, jfs, jbd2,
isofs, fuse, select, namespace, configfs, binfmt_misc, bfs, and the
do_mounts init code - part of the larger work of replacing page
allocator calls with kmalloc().
- Use clear_and_wake_up_bit() in unlock_buffer() and
journal_end_buffer_io_sync() instead of open-coding the sequence.
- Drop unused VFS exports: unexport drop_super_exclusive(), remove
start_removing_user_path_at(), and fold __start_removing_path()
into start_removing_path().
- fs/read_write: narrow the __kernel_write() export with
EXPORT_SYMBOL_FOR_MODULES().
- vfs: uapi: retire octal and hex constants in favor of (1 << n) for
the O_ flags. Finding a free bit for a new flag across the
architectures was needlessly hard with the mixed bases.
- dcache: add extra sanity checks of dead dentries in dentry_free()
via a new DENTRY_WARN_ONCE() that also prints d_flags.
- iov_iter: use kmemdup_array() in dup_iter() to harden the
allocation against multiplication overflow.
- fs/pipe: write to ->poll_usage only once.
- vfs: remove an always-taken if-branch in find_next_fd().
- dcache: use kmalloc_flex() for struct external_name in __d_alloc().
- namei: use QSTR() instead of QSTR_INIT() in path_pts().
- sync_file_range: delete dead S_ISLNK code.
- Comment fixes: retire a stale comment in fget_task_next() and fix
assorted spelling mistakes"
* tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (73 commits)
backing-file: fix backing_file_open() kerneldoc parameter
iomap: pass the correct len to fserror_report_io in __iomap_write_begin
vfs: add FS_USERNS_DELEGATABLE flag and set it for NFS
filelock: fix break_lease() stub signature for CONFIG_FILE_LOCKING=n
vfs: uapi: retire octal and hex numbers in favor of (1 << n) for O_ flags
bpf: add bpf_real_inode() kfunc
fs/read_write: Do not export __kernel_write() to the entire world
libfs: drop redundant SB_I_NOEXEC/SB_I_NODEV in init_pseudo() callers
libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
mount: honour SB_NOUSER in the new mount API
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
selftests/pipe: add pipe_bench microbenchmark
fs/pipe: pre-allocate pages outside pipe->mutex in anon_pipe_write
fs: retire stale comment in fget_task_next()
fs: fix spelling mistakes in comment
bfs: replace get_zeroed_page() with kzalloc()
binfmt_misc: replace __get_free_page() with kmalloc()
configfs: replace __get_free_pages() with kzalloc()
fs/namespace: use __getname() to allocate mntpath buffer
fs/select: replace __get_free_page() with kmalloc()
...
|
||
|
Linus Torvalds
|
50b900c564 |
Merge tag 'vfs-7.2-rc1.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull openat2 updates from Christian Brauner:
"Features:
- Add O_EMPTYPATH to openat(2)/openat2(2). To get an operable file
descriptor from an O_PATH file descriptor it is possible to use
openat(fd, ".", O_DIRECTORY) for directories, but other file types
require going through open("/proc/<pid>/fd/<nr>") and thus depend
on a functioning procfs.
With O_EMPTYPATH an empty path string is accepted and LOOKUP_EMPTY
is set at path resolution time, allowing to reopen the file behind
the file descriptor directly. Selftests are included.
- Add an OPENAT2_REGULAR flag for openat2(2) which refuses to open
anything but regular files with the new EFTYPE error code.
This implements the "ability to only open regular files" feature
requested by userspace via uapi-group.org and protects services
from being redirected to fifos, device nodes, and friends.
All atomic_open implementations were audited for OPENAT2_REGULAR
handling. Explicit checks were added to ceph, gfs2, nfs (v4), and
cifs/smb - these are the filesystems whose atomic_open can
encounter an existing non-regular file and would otherwise call
finish_open() on it or return a misleading error code.
The remaining implementations (9p, fuse, vboxsf, nfs v2/v3) only
call finish_open() on freshly created files and use
finish_no_open() for lookup hits, letting the VFS catch non-regular
files via the do_open() safety net.
Cleanups:
- Migrate the openat2 selftests to the kselftest harness and move
them under selftests/filesystems/. The tests were written in the
early days of selftests' TAP support and the modern kselftest
harness is much easier to follow and maintain. The contents of the
tests are unchanged and the new emptypath tests are ported on top.
- Make the LAST_XXX last-type constants private to fs/namei.c. The
only user outside of fs/namei.c was ksmbd which only needs to know
whether the last component is a regular one, so
vfs_path_parent_lookup() now performs the LAST_NORM check
internally. The ints are replaced with a dedicated enum last_type"
* tag 'vfs-7.2-rc1.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: replace ints with enum last_type for LAST_XXX
vfs: make LAST_XXX private to fs/namei.c
selftests: openat2: port emptypath_test to kselftest harness
kselftest/openat2: test for OPENAT2_REGULAR flag
openat2: new OPENAT2_REGULAR flag support
openat2: introduce EFTYPE error code
selftest: add tests for O_EMPTYPATH
vfs: add O_EMPTYPATH to openat(2)/openat2(2)
selftests: openat2: migrate to kselftest harness
selftests: openat2: switch from custom ARRAY_LEN to ARRAY_SIZE
selftests: openat2: move helpers to header
selftests: move openat2 tests to selftests/filesystems/
|
||
Jori Koolstra
|
0da79c259a |
vfs: uapi: retire octal and hex numbers in favor of (1 << n) for O_ flags
A recent build failure[1] exposed the diffculty of working with the
current octal and hex definitions of O_ flags when trying to find a gap
for a new flag. This difficulty is compounded by the fact that O_ flags
may have architectural specific values.
Replace the hex/octal #defines, which are hard to parse when looking for
free bits, with explicit bit shifts like (1 << 11). Also, add comments
that identify which architectures redefine some of the seemingly free
("cursed") bits in uapi/asm-generic/fcntl.h. These should not be used to
define new O_ flags (for now, at least).
The translastion was done with Claude Opus 4.8, and verified with a
(non-AI) gawk script. The accounting of which architectures claim
which bit-gaps in uapi/asm-generic/fcntl.h is also done by hand.
[1]: https://lore.kernel.org/all/agruPPybCx8q2XcJ@sirena.org.uk/
Assisted-by: Claude:Opus 4.8
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260604222405.5382-1-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
||
Thomas Gleixner
|
34594da765 |
genirq/proc: Increase default interrupt number precision to four
Quite some architectures have four character wide acronyms for architecture specific interrupts like IPI, NMI, etc. The default precision of printing the Linux device interrupt numbers is three, which causes quite some code to play games with adding or omitting space after the acronym and the colon in order to keep the per CPU numbers properly aligned. Increase the default number precision to four in the core code and get rid of the space games all over the place. At the same time align all architecture specific descriptor texts left so that they show up in the same column as the interrupt chip names, which makes the output more uniform accross architectures. Fix up the GDB script to this new scheme as well. Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260517194931.839482411@kernel.org |
||
Masami Hiramatsu (Google)
|
a494d3c8d5 |
ring-buffer: Flush and stop persistent ring buffer on panic
On real hardware, panic and machine reboot may not flush hardware cache
to memory. This means the persistent ring buffer, which relies on a
coherent state of memory, may not have its events written to the buffer
and they may be lost. Moreover, there may be inconsistency with the
counters which are used for validation of the integrity of the
persistent ring buffer which may cause all data to be discarded.
To avoid this issue, stop recording of the ring buffer on panic and
flush the cache of the ring buffer's memory.
Fixes:
|
||
Dorjoy Chowdhury
|
cf1b04aaef |
openat2: introduce EFTYPE error code
Introduce a new error code EFTYPE for wrong file type operations. EFTYPE is already used in BSD systems like FreeBSD and macOS. This will be used by the upcoming OPENAT2_REGULAR flag support to return a specific error when a path doesn't refer to a regular file. Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com> Link: https://patch.msgid.link/20260328172314.45807-2-dorjoychy111@gmail.com Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Aleksa Sarai <aleksa@amutable.com> Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org> |
||
Ethan Nelson-Moore
|
e38b27199e |
console: mdacon: remove this obsolete driver
The mdacon driver supports using ISA MDA or Hercules-compatible display adapters as a secondary text console. This was commonly used in the 1990s and earlier for debugging software which took over the primary display. It is highly unlikely anyone is doing so nowadays because serial consoles and much better methods of debugging exist. The driver is not enabled by any defconfig, nor any of the dozens of distro configs collected at [1]. It has been relegated to VTs 13-16 since commit |
||
|
Linus Torvalds
|
64edfa6506 |
Merge tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking deletions from Jakub Kicinski: "Delete some obsolete networking code Old code like amateur radio and NFC have long been a burden to core networking developers. syzbot loves to find bugs in BKL-era code, and noobs try to fix them. If we want to have a fighting chance of surviving the LLM-pocalypse this code needs to find a dedicated owner or get deleted. We've talked about these deletions multiple times in the past and every time someone wanted the code to stay. It is never very clear to me how many of those people actually use the code vs are just nostalgic to see it go. Amateur radio did have occasional users (or so I think) but most users switched to user space implementations since its all super slow stuff. Nobody stepped up to maintain the kernel code. We were lucky enough to find someone who wants to help with NFC so we're giving that a chance. Let's try to put the rest of this code behind us" * tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: drivers: net: 8390: wd80x3: Remove this driver drivers: net: 8390: ultra: Remove this driver drivers: net: 8390: AX88190: Remove this driver drivers: net: fujitsu: fmvj18x: Remove this driver drivers: net: smsc: smc91c92: Remove this driver drivers: net: smsc: smc9194: Remove this driver drivers: net: amd: nmclan: Remove this driver drivers: net: amd: lance: Remove this driver drivers: net: 3com: 3c589: Remove this driver drivers: net: 3com: 3c574: Remove this driver drivers: net: 3com: 3c515: Remove this driver drivers: net: 3com: 3c509: Remove this driver net: packetengines: remove obsolete yellowfin driver and vendor dir net: packetengines: remove obsolete hamachi driver net: remove unused ATM protocols and legacy ATM device drivers net: remove ax25 and amateur radio (hamradio) subsystem net: remove ISDN subsystem and Bluetooth CMTP caif: remove CAIF NETWORK LAYER |
||
Mingyu Wang
|
aec3202247 |
net: packetengines: remove obsolete yellowfin driver and vendor dir
Similar to the hamachi driver, the yellowfin driver supports hardware that is over two decades old and no longer in active use. Since yellowfin was the last remaining driver in the packetengines vendor directory, we can now safely remove the entire directory and drop its associated references from the parent Kconfig and Makefile. This eliminates dead code and reduces the overall maintenance burden on the netdev subsystem. Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260422044820.485660-3-25181214217@stu.xidian.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
a10e80be63 |
Merge tag 'alpha-for-v7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha
Pull alpha updates from Magnus Lindholm: "One fix to silence pgprot_modify() compiler warnings, and one patch adding SECCOMP/SECCOMP_FILTER support together with the syscall and ptrace fixes needed for it" * tag 'alpha-for-v7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha: alpha: Define pgprot_modify to silence tautological comparison warnings alpha: add support for SECCOMP and SECCOMP_FILTER |
||
|
Linus Torvalds
|
440d6635b2 |
Merge tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "pid: make sub-init creation retryable" (Oleg Nesterov)
Make creation of init in a new namespace more robust by clearing away
some historical cruft which is no longer needed. Also some
documentation fixups
- "selftests/fchmodat2: Error handling and general" (Mark Brown)
Fix and a cleanup for the fchmodat2() syscall selftest
- "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko)
- "hung_task: Provide runtime reset interface for hung task detector"
(Aaron Tomlin)
Give administrators the ability to zero out
/proc/sys/kernel/hung_task_detect_count
- "tools/getdelays: use the static UAPI headers from
tools/include/uapi" (Thomas Weißschuh)
Teach getdelays to use the in-kernel UAPI headers rather than the
system-provided ones
- "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta)
Several cleanups and fixups to the hardlockup detector code and its
documentation
- "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law)
A couple of small/theoretical fixes in the bch code
- "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo)
- "cleanup the RAID5 XOR library" (Christoph Hellwig)
A quite far-reaching cleanup to this code. I can't do better than to
quote Christoph:
"The XOR library used for the RAID5 parity is a bit of a mess right
now. The main file sits in crypto/ despite not being cryptography
and not using the crypto API, with the generic implementations
sitting in include/asm-generic and the arch implementations
sitting in an asm/ header in theory. The latter doesn't work for
many cases, so architectures often build the code directly into
the core kernel, or create another module for the architecture
code.
Change this to a single module in lib/ that also contains the
architecture optimizations, similar to the library work Eric
Biggers has done for the CRC and crypto libraries later. After
that it changes to better calling conventions that allow for
smarter architecture implementations (although none is contained
here yet), and uses static_call to avoid indirection function call
overhead"
- "lib/list_sort: Clean up list_sort() scheduling workarounds"
(Kuan-Wei Chiu)
Clean up this library code by removing a hacky thing which was added
for UBIFS, which UBIFS doesn't actually need
- "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt)
Fix a few bugs in the scatterlist code, add in-kernel tests for the
now-fixed bugs and fix a leak in the test itself
- "kdump: Enable LUKS-encrypted dump target support in ARM64 and
PowerPC" (Coiby Xu)
Enable support of the LUKS-encrypted device dump target on arm64 and
powerpc
- "ocfs2: consolidate extent list validation into block read callbacks"
(Joseph Qi)
Cleanup, simplify, and make more robust ocfs2's validation of extent
list fields (Kernel test robot loves mounting corrupted fs images!)
* tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (127 commits)
ocfs2: validate group add input before caching
ocfs2: validate bg_bits during freefrag scan
ocfs2: fix listxattr handling when the buffer is full
doc: watchdog: fix typos etc
update Sean's email address
ocfs2: use get_random_u32() where appropriate
ocfs2: split transactions in dio completion to avoid credit exhaustion
ocfs2: remove redundant l_next_free_rec check in __ocfs2_find_path()
ocfs2: validate extent block list fields during block read
ocfs2: remove empty extent list check in ocfs2_dx_dir_lookup_rec()
ocfs2: validate dx_root extent list fields during block read
ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
ocfs2: handle invalid dinode in ocfs2_group_extend
.get_maintainer.ignore: add Askar
ocfs2: validate bg_list extent bounds in discontig groups
checkpatch: exclude forward declarations of const structs
tools/accounting: handle truncated taskstats netlink messages
taskstats: set version in TGID exit notifications
ocfs2/heartbeat: fix slot mapping rollback leaks on error paths
arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel
...
|
||
|
Linus Torvalds
|
40286d6379 |
Merge tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
|
||
Matt Turner
|
bd39fc8134 |
alpha: Define pgprot_modify to silence tautological comparison warnings
Alpha's pgprot_noncached, pgprot_writecombine, and pgprot_device are all identity macros, so the generic pgprot_modify() produces tautological self-comparisons that GCC warns about: include/linux/pgtable.h:1701:25: warning: self-comparison always evaluates to true [-Wtautological-compare] Since all caching attributes are no-ops on Alpha, define pgprot_modify() to simply return newprot. Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Magnus Lindholm <linmag7@gmail.com> Link: https://lore.kernel.org/r/20260403150128.488513-1-mattst88@gmail.com Signed-off-by: Magnus Lindholm <linmag7@gmail.com> |
||
Magnus Lindholm
|
55b22075f7 |
alpha: add support for SECCOMP and SECCOMP_FILTER
Add SECCOMP and SECCOMP_FILTER support to the Alpha architecture and fix syscall entry and ptrace issues uncovered by the seccomp-bpf selftests. The syscall entry path is reworked to consistently track syscall state using r0, r1 and r2: - r1 holds the active syscall number - r2 preserves the original syscall number for restart - r0 carries the return value, with r19 (a3) indicating success/error This allows syscall restarts to be permitted only for valid ERESTART* return codes and prevents kernel-internal restart values from leaking to userspace. The syscall tracing error marker is corrected to use the saved syscall number slot, matching the Alpha ABI. Additionally, implement minimal PTRACE_GETREGSET and PTRACE_SETREGSET support for NT_PRSTATUS, exporting struct pt_regs directly. This fixes ptrace-based seccomp tests that previously failed with -EIO. With these changes, seccomp-bpf and ptrace syscall tests pass reliably on Alpha. Tested-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Magnus Lindholm <linmag7@gmail.com> Link: https://lore.kernel.org/r/20260409171439.8759-2-linmag7@gmail.com Signed-off-by: Magnus Lindholm <linmag7@gmail.com> |
||
Mike Rapoport (Microsoft)
|
6215d9f447 |
arch, mm: consolidate empty_zero_page
Reduce 22 declarations of empty_zero_page to 3 and 23 declarations of ZERO_PAGE() to 4. Every architecture defines empty_zero_page that way or another, but for the most of them it is always a page aligned page in BSS and most definitions of ZERO_PAGE do virt_to_page(empty_zero_page). Move Linus vetted x86 definition of empty_zero_page and ZERO_PAGE() to the core MM and drop these definitions in architectures that do not implement colored zero page (MIPS and s390). ZERO_PAGE() remains a macro because turning it to a wrapper for a static inline causes severe pain in header dependencies. For the most part the change is mechanical, with these being noteworthy: * alpha: aliased empty_zero_page with ZERO_PGE that was also used for boot parameters. Switching to a generic empty_zero_page removes the aliasing and keeps ZERO_PGE for boot parameters only * arm64: uses __pa_symbol() in ZERO_PAGE() so that definition of ZERO_PAGE() is kept intact. * m68k/parisc/um: allocated empty_zero_page from memblock, although they do not support zero page coloring and having it in BSS will work fine. * sparc64 can have empty_zero_page in BSS rather allocate it, but it can't use virt_to_page() for BSS. Keep it's definition of ZERO_PAGE() but instead of allocating it, make mem_map_zero point to empty_zero_page. * sh: used empty_zero_page for boot parameters at the very early boot. Rename the parameters page to boot_params_page and let sh use the generic empty_zero_page. * hexagon: had an amusing comment about empty_zero_page /* A handy thing to have if one has the RAM. Declared in head.S */ that unfortunately had to go :) Link: https://lkml.kernel.org/r/20260211103141.3215197-4-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Helge Deller <deller@gmx.de> [parisc] Tested-by: Helge Deller <deller@gmx.de> [parisc] Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Magnus Lindholm <linmag7@gmail.com> [alpha] Acked-by: Dinh Nguyen <dinguyen@kernel.org> [nios2] Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc] Acked-by: David Hildenbrand (Arm) <david@kernel.org> Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: "Borislav Petkov (AMD)" <bp@alien8.de> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guo Ren <guoren@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Christoph Hellwig
|
e20043b476 |
xor: make xor.ko self-contained in lib/raid/
Move the asm/xor.h headers to lib/raid/xor/$(SRCARCH)/xor_arch.h and include/linux/raid/xor_impl.h to lib/raid/xor/xor_impl.h so that the xor.ko module implementation is self-contained in lib/raid/. As this remove the asm-generic mechanism a new kconfig symbol is added to indicate that a architecture-specific implementations exists, and xor_arch.h should be included. Link: https://lkml.kernel.org/r/20260327061704.3707577-22-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Biggers <ebiggers@kernel.org> Tested-by: Eric Biggers <ebiggers@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Borislav Petkov (AMD)" <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: David Sterba <dsterba@suse.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Li Nan <linan122@huawei.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Magnus Lindholm <linmag7@gmail.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Song Liu <song@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Christoph Hellwig
|
503793b134 |
alpha: move the XOR code to lib/raid/
Move the optimized XOR code out of line into lib/raid. Note that the giant inline assembly block might be better off as a separate assembly source file now, but I'll leave that to the alpha maintainers. Link: https://lkml.kernel.org/r/20260327061704.3707577-12-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Magnus Lindholm <linmag7@gmail.com> Tested-by: Magnus Lindholm <linmag7@gmail.com> Reviewed-by: Eric Biggers <ebiggers@kernel.org> Tested-by: Eric Biggers <ebiggers@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Borislav Petkov (AMD)" <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: David Sterba <dsterba@suse.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Li Nan <linan122@huawei.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Song Liu <song@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Christoph Hellwig
|
35ebc4de10 |
xor: remove macro abuse for XOR implementation registrations
Drop the pretty confusing historic XOR_TRY_TEMPLATES and XOR_SELECT_TEMPLATE, and instead let the architectures provide a arch_xor_init that calls either xor_register to register candidates or xor_force to force a specific implementation. Link: https://lkml.kernel.org/r/20260327061704.3707577-10-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Biggers <ebiggers@kernel.org> Tested-by: Eric Biggers <ebiggers@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Borislav Petkov (AMD)" <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: David Sterba <dsterba@suse.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Li Nan <linan122@huawei.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Magnus Lindholm <linmag7@gmail.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Song Liu <song@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Ilpo Järvinen
|
f699bcc8bc |
resource: Pass full extent of empty space to resource_alignf callback
__find_resource_space() calculates the full extent of empty space but only passes the aligned space to resource_alignf callback. In some situations, the callback may choose take advantage of the free space before the requested alignment. Pass the full extent of the calculated empty space to resource_alignf callback as an additional parameter. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Xifer <xiferdev@gmail.com> Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com |
||
Nathan Chancellor
|
8678591b47 |
kbuild: Split .modinfo out from ELF_DETAILS
Commit |
||
|
Linus Torvalds
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Kees Cook
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
Thomas Weißschuh
|
cd7a5651db |
alpha: add missing address argument in call to page_table_check_pte_clear()
After the merge of the alpha and mm trees, this code does not compile, as a parameter is missing in a call to page_table_check_pte_clear(). The parameter was re-added in commit |
||
|
Linus Torvalds
|
4cff5c05e0 |
Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
||
|
Linus Torvalds
|
36ae1c45b2 |
Merge tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
|
||
|
Linus Torvalds
|
9f722cb730 |
Merge tag 'alpha-for-v7.0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha
Pull alpha update from Magnus Lindholm: - alpha: fix user-space corruption during memory compaction * tag 'alpha-for-v7.0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha: alpha: fix user-space corruption during memory compaction |
||
|
Linus Torvalds
|
26c9342bb7 |
Merge tag 'pull-filename' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs 'struct filename' updates from Al Viro:
"[Mostly] sanitize struct filename handling"
* tag 'pull-filename' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (68 commits)
sysfs(2): fs_index() argument is _not_ a pathname
alpha: switch osf_mount() to strndup_user()
ksmbd: use CLASS(filename_kernel)
mqueue: switch to CLASS(filename)
user_statfs(): switch to CLASS(filename)
statx: switch to CLASS(filename_maybe_null)
quotactl_block(): switch to CLASS(filename)
chroot(2): switch to CLASS(filename)
move_mount(2): switch to CLASS(filename_maybe_null)
namei.c: switch user pathname imports to CLASS(filename{,_flags})
namei.c: convert getname_kernel() callers to CLASS(filename_kernel)
do_f{chmod,chown,access}at(): use CLASS(filename_uflags)
do_readlinkat(): switch to CLASS(filename_flags)
do_sys_truncate(): switch to CLASS(filename)
do_utimes_path(): switch to CLASS(filename_uflags)
chdir(2): unspaghettify a bit...
do_fchownat(): unspaghettify a bit...
fspick(2): use CLASS(filename_flags)
name_to_handle_at(): use CLASS(filename_uflags)
vfs_open_tree(): use CLASS(filename_uflags)
...
|
||
Qi Zheng
|
44b079583f |
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of empty PTE page table pages (such as 100GB+). To resolve this problem, first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the PT_RECLAIM feature, which resolves this problem. Link: https://lkml.kernel.org/r/3380f40a89b73c488202c85f9a8abf99fb08543b.1769515122.git.zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Acked-by: Magnus Lindholm <linmag7@gmail.com> [alpha] Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand (Red Hat) <david@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Lance Yang <ioworker0@gmail.com> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mike Rapoport (Microsoft)
|
4267739cab |
arch, mm: consolidate initialization of SPARSE memory model
Every architecture calls sparse_init() during setup_arch() although the data structures created by sparse_init() are not used until the initialization of the core MM. Beside the code duplication, calling sparse_init() from architecture specific code causes ordering differences of vmemmap and HVO initialization on different architectures. Move the call to sparse_init() from architecture specific code to free_area_init() to ensure that vmemmap and HVO initialization order is always the same. Link: https://lkml.kernel.org/r/20260111082105.290734-25-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alex Shi <alexs@kernel.org> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "Borislav Petkov (AMD)" <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Magnus Lindholm <linmag7@gmail.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Pratyush Yadav <pratyush@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mike Rapoport (Microsoft)
|
d49004c5f0 |
arch, mm: consolidate initialization of nodes, zones and memory map
To initialize node, zone and memory map data structures every architecture calls free_area_init() during setup_arch() and passes it an array of zone limits. Beside code duplication it creates "interesting" ordering cases between allocation and initialization of hugetlb and the memory map. Some architectures allocate hugetlb pages very early in setup_arch() in certain cases, some only create hugetlb CMA areas in setup_arch() and sometimes hugetlb allocations happen mm_core_init(). With arch_zone_limits_init() helper available now on all architectures it is no longer necessary to call free_area_init() from architecture setup code. Rather core MM initialization can call arch_zone_limits_init() in a single place. This allows to unify ordering of hugetlb vs memory map allocation and initialization. Remove the call to free_area_init() from architecture specific code and place it in a new mm_core_init_early() function that is called immediately after setup_arch(). After this refactoring it is possible to consolidate hugetlb allocations and eliminate differences in ordering of hugetlb and memory map initialization among different architectures. As the first step of this consolidation move hugetlb_bootmem_alloc() to mm_core_early_init(). Link: https://lkml.kernel.org/r/20260111082105.290734-24-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alex Shi <alexs@kernel.org> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "Borislav Petkov (AMD)" <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Magnus Lindholm <linmag7@gmail.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Pratyush Yadav <pratyush@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mike Rapoport (Microsoft)
|
ba1c86874e |
alpha: introduce arch_zone_limits_init()
Patch series "arch, mm: consolidate hugetlb early reservation", v3. Order in which early memory reservation for hugetlb happens depends on architecture, on configuration options and on command line parameters. Some architectures rely on the core MM to call hugetlb_bootmem_alloc() while others call it very early to allow pre-allocation of HVO-style vmemmap. When hugetlb_cma is supported by an architecture it is initialized during setup_arch() and then later hugetlb_init code needs to understand did it happen or not. To make everything consistent and unified, both reservation of hugetlb memory from bootmem and creation of CMA areas for hugetlb must be called from core MM initialization and it would have been a simple change. However, HVO-style pre-initialization ordering requirements slightly complicate things and for HVO pre-init to work sparse and memory map should be initialized after hugetlb reservations. This required pulling out the call to free_area_init() out of setup_arch() path and moving it MM initialization and this is what the first 23 patches do. These changes are deliberately split into per-arch patches that change how the zone limits are calculated for each architecture and the patches 22 and 23 just remove the calls to free_area_init() and sprase_init() from arch/*. Patch 24 is a simple cleanup for MIPS. Patches 25 and 26 actually consolidate hugetlb reservations and patches 27 and 28 perform some aftermath cleanups. This patch (of 29): Move calculations of zone limits to a dedicated arch_zone_limits_init() function. Later MM core will use this function as an architecture specific callback during nodes and zones initialization and thus there won't be a need to call free_area_init() from every architecture. Link: https://lkml.kernel.org/r/20260111082105.290734-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20260111082105.290734-2-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Magnus Lindholm <linmag7@gmail.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alex Shi <alexs@kernel.org> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "Borislav Petkov (AMD)" <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Pratyush Yadav <pratyush@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Magnus Lindholm
|
dd5712f337 |
alpha: fix user-space corruption during memory compaction
Alpha systems can suffer sporadic user-space crashes and heap corruption when memory compaction is enabled. Symptoms include SIGSEGV, glibc allocator failures (e.g. "unaligned tcache chunk"), and compiler internal errors. The failures disappear when compaction is disabled or when using global TLB invalidation. The root cause is insufficient TLB shootdown during page migration. Alpha relies on ASN-based MM context rollover for instruction cache coherency, but this alone is not sufficient to prevent stale data or instruction translations from surviving migration. Fix this by introducing a migration-specific helper that combines: - MM context invalidation (ASN rollover), - immediate per-CPU TLB invalidation (TBI), - synchronous cross-CPU shootdown when required. The helper is used only by migration/compaction paths to avoid changing global TLB semantics. Additionally, update flush_tlb_other(), pte_clear(), to use READ_ONCE()/WRITE_ONCE() for correct SMP memory ordering. This fixes observed crashes on both UP and SMP Alpha systems. Reviewed-by: Ivan Kokshaysky <ink@unseen.parts> Tested-by: Matoro Mahri <matoro_mailinglist_kernel@matoro.tk> Tested-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Magnus Lindholm <linmag7@gmail.com> Link: https://lore.kernel.org/r/20260102173603.18247-2-linmag7@gmail.com Signed-off-by: Magnus Lindholm <linmag7@gmail.com> |
||
Thomas Gleixner
|
99d2592023 |
rseq: Implement sys_rseq_slice_yield()
Provide a new syscall which has the only purpose to yield the CPU after the kernel granted a time slice extension. sched_yield() is not suitable for that because it unconditionally schedules, but the end of the time slice extension is not required to schedule when the task was already preempted. This also allows to have a strict check for termination to catch user space invoking random syscalls including sched_yield() from a time slice extension region. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de |
||
David Hildenbrand
|
8e38607aa4 |
treewide: provide a generic clear_user_page() variant
Patch series "mm: folio_zero_user: clear page ranges", v11.
This series adds clearing of contiguous page ranges for hugepages.
The series improves on the current discontiguous clearing approach in two
ways:
- clear pages in a contiguous fashion.
- use batched clearing via clear_pages() wherever exposed.
The first is useful because it allows us to make much better use of
hardware prefetchers.
The second, enables advertising the real extent to the processor. Where
specific instructions support it (ex. string instructions on x86; "mops"
on arm64 etc), a processor can optimize based on this because, instead of
seeing a sequence of 8-byte stores, or a sequence of 4KB pages, it sees a
larger unit being operated on.
For instance, AMD Zen uarchs (for extents larger than LLC-size) switch to
a mode where they start eliding cacheline allocation. This is helpful not
just because it results in higher bandwidth, but also because now the
cache is not evicting useful cachelines and replacing them with zeroes.
Demand faulting a 64GB region shows performance improvement:
$ perf bench mem mmap -p $pg-sz -f demand -s 64GB -l 5
baseline +series
(GBps +- %stdev) (GBps +- %stdev)
pg-sz=2MB 11.76 +- 1.10% 25.34 +- 1.18% [*] +115.47% preempt=*
pg-sz=1GB 24.85 +- 2.41% 39.22 +- 2.32% + 57.82% preempt=none|voluntary
pg-sz=1GB (similar) 52.73 +- 0.20% [#] +112.19% preempt=full|lazy
[*] This improvement is because switching to sequential clearing
allows the hardware prefetchers to do a much better job.
[#] For pg-sz=1GB a large part of the improvement is because of the
cacheline elision mentioned above. preempt=full|lazy improves upon
that because, not needing explicit invocations of cond_resched() to
ensure reasonable preemption latency, it can clear the full extent
as a single unit. In comparison the maximum extent used for
preempt=none|voluntary is PROCESS_PAGES_NON_PREEMPT_BATCH (32MB).
When provided the full extent the processor forgoes allocating
cachelines on this path almost entirely.
(The hope is that eventually, in the fullness of time, the lazy
preemption model will be able to do the same job that none or
voluntary models are used for, allowing us to do away with
cond_resched().)
Raghavendra also tested previous version of the series on AMD Genoa and
sees similar improvement [1] with preempt=lazy.
$ perf bench mem map -p $page-size -f populate -s 64GB -l 10
base patched change
pg-sz=2MB 12.731939 GB/sec 26.304263 GB/sec 106.6%
pg-sz=1GB 26.232423 GB/sec 61.174836 GB/sec 133.2%
This patch (of 8):
Let's drop all variants that effectively map to clear_page() and provide
it in a generic variant instead.
We'll use the macro clear_user_page to indicate whether an architecture
provides it's own variant.
Also, clear_user_page() is only called from the generic variant of
clear_user_highpage(), so define it only if the architecture does not
provide a clear_user_highpage(). And, for simplicity define it in
linux/highmem.h.
Note that for parisc, clear_page() and clear_user_page() map to
clear_page_asm(), so we can just get rid of the custom clear_user_page()
implementation. There is a clear_user_page_asm() function on parisc, that
seems to be unused. Not sure what's up with that.
Link: https://lkml.kernel.org/r/20260107072009.1615991-1-ankur.a.arora@oracle.com
Link: https://lkml.kernel.org/r/20260107072009.1615991-2-ankur.a.arora@oracle.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Co-developed-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ankur Arora <ankur.a.arora@oracle.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzessutek Wilk <konrad.wilk@oracle.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Al Viro
|
9b323d2f47 |
alpha: switch osf_mount() to strndup_user()
... same as native mount(2) is doing for devname argument. While we are at it, fix misspelling ufs_args as cdfs_args in osf_ufs_mount() - layouts are identical, so it doesn't change anything, but the current variant is confusing for no reason. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
Darrick J. Wong
|
6025447737 |
uapi: promote EFSCORRUPTED and EUCLEAN to errno.h
Stop definining these privately and instead move them to the uapi errno.h so that they become canonical instead of copy pasta. Cc: linux-api@vger.kernel.org Signed-off-by: Darrick J. Wong <djwong@kernel.org> Link: https://patch.msgid.link/176826402587.3490369.17659117524205214600.stgit@frogsfrogsfrogs Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> |